Scientists at Argonne National Laboratory have made progress toward a higher-capacity lithium-ion battery to meet rising consumer demand.
With the growing number of electric vehicles on the road and an increasing reliance on consumer electronics, demand has never been greater for development of lithium-ion batteries (LIBs) that can sustain a higher energy capacity, or amount of charge stored within the battery.
One way to increase the overall energy capacity of LIBs is to increase the energy capacity of the anode, or the negative electrode. For the past several decades, state-of-the-art LIBs have been made with graphite anodes. Graphite‚Äôs energy capacity is stable, meaning the capacity does not fade, and the material does not crack even after more than¬†1000¬†full charge-discharge cycles. However, graphite has a low theoretical energy capacity, which cannot meet the increasing energy demands of today‚Äôs society.
‚ÄúArgonne has unique abilities available at the¬†APS¬†and¬†CNM. With the storage ring light source, we can probe the phase transformation during lithiation and delithiation, which allows us to see the reaction reversibility.‚ÄĚ ‚ÄĒ Gui-Liang Xu, Argonne chemist
In a new study, a team led by researchers at the U.S. Department of Energy‚Äôs (DOE) Argonne National Laboratory have demonstrated the increased capability of a potential new, higher-capacity anode material. This composite material had¬†originally been developed for sodium-ion batteries, which are more infrequently commercially used than lithium-ion batteries. This new study sought to apply the material to lithium-ion batteries.
Recently, two materials have been at the forefront of research for next-generation battery anodes ‚ÄĒ silicon and phosphorus. Both silicon and phosphorus have a theoretical energy capacity at least¬†10¬†times greater than graphite, meaning they could surpass the energy capacity requirements for LIBs. According to senior materials scientist and Argonne Distinguished Fellow Khalil Amine, the lead researcher of the Argonne study, silicon has two major issues. The first issue involves the high-volume expansion when silicon is lithiated during charging, which would likely cause the anode material to break apart. Cracking would lead to a loss of energy capacity, he explained.
The second issue involves a term called initial coulombic efficiency (ICE). When a battery goes through a full charge-discharge cycle, the charge output of the battery theoretically should match the charge input. However, some energy in the charge output is lost to the lithium reacting with the anode material. To develop a practical¬†LIB, the ratio of the charge output compared to the charge input on the first charge-discharge cycle should be above¬†90%. This ratio is the¬†ICE. With silicon, the¬†ICE¬†is less than¬†80%, which Amine explained renders it infeasible for practical use.
In their research, Amine, Argonne chemist Gui-Liang Xu, and their colleagues explored two potential types of phosphorus: black and red phosphorus.¬†‚Äč‚ÄúPhosphorus has a very high energy capacity,‚ÄĚ Xu said.¬†‚Äč‚ÄúWhen we explored the material, we found that our anode material has a very high¬†ICE¬†of more than¬†90%.‚ÄĚ
An¬†ICE¬†of more than¬†90% demonstrates that very few side reactions occur between the anode material and the electrolyte, so not much lithium is lost during the initial charging and discharging.
The team created their own anode composite composed primarily of black phosphorus ‚ÄĒ a highly conductive form of phosphorus with a high theoretical capacity ‚ÄĒ and conductive carbon compounds.
To create the composite, the researchers ground the bulk phosphorus material and conductive carbon into micrometer-sized particles, which increases the density of the anode.
When measuring the life cycles, or the total number of times a battery can be charged and discharged, Amine and his colleagues turned to Argonne‚Äôs Advanced Photon Source (APS) and Center for Nanoscale Materials (CNM), both¬†DOE¬†Office of Science User Facilities. Employing in-situ storage ring light source X-ray diffraction at the¬†APS¬†and in-situ scanning electron microscopy at the¬†CNM, the team observed the anode‚Äôs phase and volume transformation during repeated charging and discharging.
‚ÄúArgonne has unique abilities available at the¬†APS¬†and¬†CNM,‚ÄĚ Xu said.¬†‚Äč‚ÄúWith the storage ring light source, we can probe the phase transformation during lithiation and delithiation, which allows us to see the reaction reversibility.‚ÄĚ
After showing the stability of the black phosphorous composite, the team investigated a composite with red phosphorus instead of black phosphorus. Black phosphorus, though significantly more conductive than red phosphorus, is too expensive for practical use in the market. With the red phosphorus composite, which is an economically viable option, the battery showed a similar stability and high¬†ICE, with a very high practical capacity.
The team is currently working on a composite material made mostly of red phosphorus, and the material shows promising results, Xu said.¬†‚Äč‚ÄúWe‚Äôre trying to initiate collaboration with industry partners so we can scale up this material, so it can be commercialized in the future.‚ÄĚ
The research paper on the study,¬†‚Äč‚ÄúA practical phosphorus-based anode material for high-energy lithium-ion batteries,‚ÄĚ appeared online on April¬†26,¬†2020, in Nano Energy. The research project was funded by the Battery Materials Research Program in¬†DOE‚Äôs Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office.
About Argonne‚Äôs Center for Nanoscale Materials
The Center for Nanoscale Materials is one of the five¬†DOE¬†Nanoscale Science Research Centers, premier national user facilities for interdisciplinary research at the nanoscale supported by the¬†DOE¬†Office of Science. Together the NSRCs comprise a suite of complementary facilities that provide researchers with state-of-the-art capabilities to fabricate, process, characterize and model nanoscale materials, and constitute the largest infrastructure investment of the National Nanotechnology Initiative. The NSRCs are located at¬†DOE‚Äôs Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, Sandia and Los Alamos National Laboratories. For more information about the¬†DOE¬†NSRCs, please visit¬†https://‚Äčsci‚Äčence‚Äč.osti‚Äč.gov/‚ÄčU‚Äčs‚Äče‚Äčr‚Äč-‚ÄčF‚Äča‚Äčc‚Äči‚Äčl‚Äči‚Äčt‚Äči‚Äče‚Äčs‚Äč/‚ÄčU‚Äčs‚Äče‚Äčr‚Äč-‚ÄčF‚Äča‚Äčc‚Äči‚Äčl‚Äči‚Äčt‚Äči‚Äče‚Äčs‚Äč-‚Äča‚Äčt‚Äč-‚Äča‚Äč-‚ÄčG‚Äčlance.
About the¬†Advanced Photon Source
The U. S. Department of Energy Office of Science‚Äôs Advanced Photon Source (APS) at Argonne National Laboratory is one of the world‚Äôs most productive X-ray light source facilities. The¬†APS¬†provides high-brightness X-ray beams to a diverse community of researchers in materials science, chemistry, condensed matter physics, the life and environmental sciences, and applied research. These X-rays are ideally suited for explorations of materials and biological structures; elemental distribution; chemical, magnetic, electronic states; and a wide range of technologically important engineering systems from batteries to fuel injector sprays, all of which are the foundations of our nation‚Äôs economic, technological, and physical well-being. Each year, more than¬†5,000¬†researchers use the¬†APS¬†to produce over¬†2,000¬†publications detailing impactful discoveries, and solve more vital biological protein structures than users of any other X-ray light source research facility.¬†APS¬†scientists and engineers innovate technology that is at the heart of advancing accelerator and light-source operations. This includes the insertion devices that produce extreme-brightness X-rays prized by researchers, lenses that focus the X-rays down to a few nanometers, instrumentation that maximizes the way the X-rays interact with samples being studied, and software that gathers and manages the massive quantity of data resulting from discovery research at the¬†APS.
This research used resources of the Advanced Photon Source, a U.S.¬†DOE¬†Office of Science User Facility operated for the¬†DOE¬†Office of Science by Argonne National Laboratory under Contract No.¬†DE-AC02–06CH11357.
Argonne National Laboratory¬†seeks solutions to pressing national problems in science and technology. The nation‚Äôs first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America‚Äôs scientific leadership and prepare the nation for a better future. With employees from more than¬†60¬†nations, Argonne is managed by¬†UChicago Argonne,¬†LLC¬†for the¬†U.S. Department of Energy‚Äôs Office of Science.
The U.S. Department of Energy‚Äôs Office of Science¬†is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit¬†https://‚Äčener‚Äčgy‚Äč.gov/‚Äčs‚Äčc‚Äčience.